4ch 1080P Mobile NVR
In stock
SKU
MNVR5504
- User-friendly GUI providing easy and flexible operations.
- Pluggable 4G (FDD-LTE), 3G (WCDMA), and Wi-Fi
- module providing flexible data transmission solutions.
- Pluggable GPS (Global Positioning System) module precisely
- positioning the vehicle via the satellite and recording the location
- information in the video stream.
- 4 independent network interfaces connectable to 4 IP cameras;
- each channel supports up to 1080P resolution with H.264
- encoding technology.
- Pluggable dummy HDD for HDD with up to 2 TB capacity.
- Stores videos on SD card when the HDD/SSD are broken.
- Information collection interfaces collect driving information such as left/right turn, braking, reversing, etc.
- Specialized aviation connectors ensuring signal stability.
- Shutdown delay (0 h to 6 h) and 24hour scheduled startup/
- shutdown.
- Battery protection avoids vehicle from running out of battery.
- Wide-range power input (+9 VDC to +32 VDC).
- Power-off protection prevents key data loss.
- Aluminum die-cast chassis with no fan design well adaptable to
- working environment.
- Software-based firewall supported.
- Connectable to PTZ camera and PTZ control is supported.
- Support accessing via WEB browser.
Video/Audio input | |
IP camera | 4ch |
Audio input | 4ch |
Video/Audio output | |
Video output | 1-ch. Resolution: 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz |
2-ch. Resolution: PAL: 704 × 576, NTSC: 704 × 480 | |
Audio output | 2-ch |
Encoding/Decoding parameters | |
Video compression | H.264 |
Frame rate | 25fps (PAL) / 30fps (NTSC) |
Audio compression | G.711 |
Audio bitrate | 16Kbps |
Dual Streams | Supported |
Hard Disk | |
Type | 2 × 2.5 inch hard disk (HDD/SSD) |
Capacity | Up to 1 TB for each disk |
Wireless Network | |
3G/4G dialing | Optional pluggable 3G(WCDMA)and 4G(FDD-LTE) |
Wi-Fi | 802.11 b/g/n supported, 2.4GHz |
Positioning | |
Type | Built-in |
Positioning Module | GPS(Global Positioning System) |
External interface | |
Two-way audio compression | G722 |
Sensor-in | 4 high/low level signal inputs |
Alarm input | 3 high/low level signal inputs |
Alarm output | 2 relay signal outputs |
Serial interface | 1 RS-232, 1 RS-422 |
USB port | Front panel: 1 × standard USB 2.0; |
Rear panel: 1 × aviation plug USB 2.0 | |
SD card | 1 SD/SDHC/SDXC slot, up to 256 GB |
CAN Interface | None |
General | |
Operating system | Linux |
Operating method | Mouse, IR remote control, and Web control |
Power Supply: | Input: 9 to 32 VDC; Output: 12 VDC/1 A, 5 VDC/1 A |
Power Consumption: | Standby: ≤ 0.5 W |
Full load: ≤ 70 W | |
Note: Without peripheral and storage media: ≤ 20 W | |
Working temperature | ● Device that provides dummy HDD with heating function: |
-30 °C to +60 °C (-22 °F to +140°F) | |
● Other devices: | |
-10 °C to +60 °C (14 °F to 140°F) | |
Working humidity | 10% to 90% |
Dimensions (W×D×H): | 206 × 248.4 × 60 mm (8.1 × 9.8 × 2.4 inch) |
Weight (without HDDs/SSDs): | ≤ 1.6 kg (3.53 lb) (without hard disk ) |
Sign In
Create New Account