Face Recognition Terminal
• Wall mounting and base mounting
• 5-inch LCD touch screen to display operation interface, etc. • 0.3 MP wide-angle lens
• Face recognition distance: 0.3 m to 1 m
• High performance processor with deep learning algorithm
• Max. 1000 face pictures storage
• Multiple authentication modes: authentication by comparing face picture, by swiping card and comparing face picture, by custom mode, etc.
• Applies face picture data and card data to the device via TCP/IP or uploading them to the device via the USB flash drive
• Stand-alone operation
• Transmits and saves the comparing results and the captured face pictures to the client software or others
• Supports TCP/IP, Wi-Fi , and EHome public network communication
• Connects to external access controller or card reader via Wiegand communication
• Connects to secure door control unit via RS-485 communication to avoid the door opening when the terminal is destroyed
• Watchdog design for protecting the device and ensuring device running properly
• Voice prompt
* Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security •level, use multiple authentication modes.
System Parameters | |
Card Reading Frequency: | 13.56MHz |
Indicator: | Dual-color LED Indicator |
1:N Face Recognition Duration: | ≤ 1 s/Person |
Operation System: | Linux |
Card Reading Distance: | 1 ~ 5cm |
Card Capacity: | 1000 |
Face Recognition Accuracy Rate: | ≥ 99% |
Card Type: | EM Card (IPC7K8105E) |
Mifare Card (IPC7K8105M) | |
Camera: | 0.3 MP Wide-Angle |
Event Capacity: | 50000 |
Face Recognition Distance: | 0.3 m to 1 m |
Face Capacity: | 1000 |
Device Interfaces | |
Communication Mode: | Ethernet 10/100Mbps Self-adaptive; Wi-Fi |
Output Interface: | Doorbell × 1, Lock × 1, Alarm Output × 1 |
Input Interface: | RS-485 × 1, Wiegand × 1, Door Magnetic Sensor × 1, Exit Button × 1, Tamper × 1, Alarm Input × 2 |
USB Interface: | USB2.0 |
General | |
LCD Screen: | 5-inch LCD Touch Screen; Resolution: 800 × 480 |
Lithium Battery: | Not Support |
Power Supply: | 12 VDC/2 A |
Installation: | Base Mounting; Wall Mounting |
Application Situation: | Indoor |
Working Humidity: | 10% to 90% (Non-Condensing) |
Working Temperature : | -10°C to +50°C (14°F to +122°F) |
Dimensions (L×W×H): | 190mm × 157mm × 98mm (7.48” × 3.86” × 6.18") |